Setting The Control Lock - Midea MLTW44A4BWW User's Manual & Installation Instructions

•
If you need to pause the cycle (for example to add or remove items or
adjust the load), press the Start Pause button, then open the lid. Your
washer stops. When you are ready to resume washing, close the lid, then
press the Start Pause button.
6. Unload your laundry
When the wash cycle is complete:
•
The Screen shows End.
•
Your washer beeps six times after the cycle is done.
•
Your washer unlocks the lid.
•
Open the lid and remove the laundry.

Setting the Control Lock

Your washer has a Control Lock function to prevent children from playing with
your washer. When you turn on the Control Lock, the only buttons that work
are the Power button and the Soil Level and Water Level buttons you use
Control Lock.
•
Press and hold both the Soil Level and Water Level buttons for three
seconds. The Control Lock light turns on.
•
Level buttons for three seconds.
NOTE:
•
If your washer is not turned on, the Control Lock can still remain set.
Press the Power button, turn on the Control Lock function, then press
Power
Rinse
Wash

Soil Level
Control Lock
Control Lock
Spin

Water Level
Soil Level and Water
33