Table of Contents
Advertisement
MOBILITY
▷
Use nylon ropes or straps, which will enable
the vehicle to be towed without jerking.
▷
Make sure the tow rope is not twisted when
fastening.
▷
Check the attachment of the tow fitting and
tow rope in regular intervals.
▷
Do not exceed a towing speed of
30 mph/50 km/h.
▷
Do not exceed a towing distance of
3 miles/5 km.
▷
When driving off to tow the vehicle, make
sure that the tow rope is taut.
Tow fitting
General information
The screw-in tow fitting should always be car-
ried in the vehicle.
The tow fitting can be screwed in at the front
or rear of the vehicle.
The tow fitting is found in the onboard vehicle
tool kit.
Observe the following notes when using the
tow fitting:
▷
Use only the tow fitting provided with the
vehicle.
▷
Turn the tow fitting at least 5 turns clock-
wise and screw it in as far as it will go. If
necessary, tighten with a suitable object.
▷
After use, unscrew the tow fitting counter-
clockwise.
▷
Use the tow fitting for towing on paved
roads only.
342
Breakdown Assistance
Online Edition for Part no. 01405A88AA4 - VI/23
▷
Avoid lateral loading of the tow fitting, for
instance do not lift the vehicle by the tow
fitting.
▷
Check the attachment of the tow fitting in
regular intervals.
Additional information:
Onboard vehicle tool kit, refer to page 333.
Safety information
NOTICE
If the tow fitting is not used as intended, there
may be damage to the vehicle or to the tow
fitting. There is a risk of damage to property.
Follow the notes on using the tow fitting.
Screw thread for tow fitting
Press on the mark on the edge of the cover to
push it out.
OwnersManuals2.com
Advertisement
Table of Contents
