Table of Contents
Advertisement
CONTROLS
Turning off the system
Depending on the equipment version,
press the relevant button on the steer-
ing wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting Cruise Control
Stopping the system manually
When active, press the button.
Stopping the system automatically
The system is automatically interrupted in the
following situations, for example:
▷
When braking manually.
▷
Selector lever position D is disengaged.
▷
While Dynamic Traction Control is enabled
or Dynamic Stability Control is disabled.
▷
While Dynamic Stability Control regulates
driving stability.
Adjusting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted.
204
Driver assistance systems
Online Edition for Part no. 01405A88AA4 - VI/23
When the system is switched on, the current
speed is maintained and stored as the set
speed.
The stored speed is displayed on the speed-
ometer.
If necessary, the Dynamic Stability Control will
be turned on.
The speed can also be stored by pressing a
button.
Press the button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when the
road is clear.
▷
Each time the rocker switch is tapped to the
resistance point, the set speed increases or
decreases by 1 mph/1 km/h.
▷
Each time the rocker switch is pressed
past the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
The maximum speed that can be set de-
pends on the vehicle.
▷
Pressing the rocker switch to the resistance
point and holding it: vehicle accelerates or
decelerates without pressure on the accel-
erator pedal.
After the rocker switch is released, the vehi-
cle maintains its final speed. Pressing the
OwnersManuals2.com
Advertisement
Table of Contents
