Table of Contents
Advertisement
CONTROLS
The air automatically exits through the air
vents to the windshield, the side windows, the
upper body area and into the footwell.
The system switches off automatically after
approx. 30 minutes or when the drive-ready
state is activated.
If pre-conditioning is used during the charg-
ing process, less air conditioning capacity will
be required while driving. This optimizes the
range.
Functional requirements
▷
The vehicle is in idle state or standby state.
▷
The high-voltage battery is sufficiently
charged or a charging cable is connected.
If the high-voltage battery is heavily dis-
charged, it can take some time after con-
necting the charging cable before the pre-
conditioning is functional.
▷
Time and date are set correctly.
▷
The ventilation air vents are open.
Turning on/turning off the pre-
conditioning
Turning on/turning off via iDrive
1.
Tap the icon for the Climate menu
on the menu bar.
2.
"General settings"
3.
"Pre-conditioning"
4.
Select the desired setting.
Turning on via vehicle key
The system can be switched on using the vehi-
cle key.
Press the button on the vehicle key
three times within 1 second.
After using the vehicle key, it takes ap-
prox. 3 seconds until preconditioning is turned
on.
254
Climate control
Online Edition for Part no. 01405A88AA4 - VI/23
Automatic switch-off
To ensure the minimum range of the vehi-
cle, the pre-conditioning may be automatically
switched off, for instance after repeated activa-
tion or due to an insufficient state of charge of
the high-voltage battery. After turning off due
to an insufficient state of charge, charge the
high-voltage battery. The pre-conditioning is
then available again.
Climate control for departure time
General information
Departure times can be set with time and day
of the week.
The switch-on point is determined automati-
cally based on the temperature.
On the desired weekdays, the system will be
turned on promptly before the set departure
time.
The departure time is preselected in two steps:
▷
Set departure times.
▷
Activate departure times.
A minimum of 10 minutes should pass be-
tween setting and activating the departure
time and the planned departure time to allow a
sufficient period of time for the climate control.
Pre-conditioning will be turned off automati-
cally a few minutes after the set departure
time.
Setting the departure time
1.
Tap the icon for the Climate menu
on the menu bar.
2.
"General settings"
3.
"Pre-conditioning"
4.
"Departure plan"
5.
Set the desired departure time.
6.
Select day of the week, if needed.
OwnersManuals2.com
Advertisement
Table of Contents
