Table of Contents
Advertisement
6 bar/87 psi. Do not turn off the compres-
sor in this phase.
2.
Switch off the compressor.
Checking the tire pressure
Read the tire pressure on the tire pressure dis-
play of the compressor. The tire pressure must
be at least 2.5 bar/36 psi.
Tire pressure too high
If the tire pressure is too high, reduce the tire
pressure with the pressure reducing valve on
the compressor.
Minimum tire inflation pressure is not
reached
Do not continue driving unless a minimum tire
pressure of 2.5 bar/36 psi is reached. Contact
an authorized service center or another quali-
fied service center or repair shop.
Minimum tire inflation pressure is
reached
1.
Pull the connector out of the socket in the
vehicle interior.
2.
Disconnect the hose from the sealant bottle
and the valve on the wheel.
3.
Screw the valve cap onto the valve.
4.
Stow the tire repair set in the cargo area.
5.
Immediately drive 5 miles/10 km to ensure
that the tire sealant is evenly distributed in
the tire.
Online Edition for Part no. 01405A88AA4 - VI/23
Wheels and tires
Do not exceed the speed limit of
50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
Tire sealant may spray from the damaged
area during the initial wheel rotations.
Adjusting the tire pressure
1.
Stop at a suitable location.
2.
Connect the hose directly to the compres-
sor and turn clockwise by 90° until it audi-
bly engages.
3.
Unscrew the valve cap from the wheel and
screw the connecting piece of the hose
onto the valve.
4.
Insert the connector into the socket in the
vehicle interior.
5.
Read the tire pressure on the tire pressure
display of the compressor.
Do not continue driving unless a minimum
tire pressure of 1.3 bar/19 psi is displayed.
Contact an authorized service center or an-
other qualified service center or repair shop.
6.
Correct the tire pressure to 2.5 bar/36 psi.
MOBILITY
309
OwnersManuals2.com
Advertisement
Table of Contents
