Table of Contents
Advertisement
a
a
a
ga
a ee
aE EN,
Te
ae
Troubleshooting
Symptom
Remedy
The power is not on.
° Connect the AC power cord to a wall outlet
securely.
Make sure the batteries are inserted correctly.
You cannot turn on the player with the remote
when you operate the player on batteries.
There is no audio.
°
General
Make sure the function button (CD, RADIO, or
TAPE) you want to use is pressed.
Adjust the volume.
Unplug the headphones when listening through
speakers.
The CD does not play/"no disc"
°
lights in the display even when a
e
CBris in place.
Make sure that the CD compartment is closed.
Place the CD with the label surface up.
Clean the CD (see page 22).
Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
Make sure CD is pressed.
CD Player
The sound drops out.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged
Place the player in a location free from
vibration.
The audio is weak or has poor
.
quality.
Radio
The picture of your TV becomes
.
unstable.
Replace all the batteries with new ones if they
are weak
Move the player away from the TV.
If you are using the remote while listening to
AM radio, noise may be heard. This is
unavoidable.
If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
continued
Additional Information
| 23
Advertisement
Table of Contents
