Table of Contents
Advertisement
24
|
i
bf
|
Troubleshooting (continued)
Symptom
Remedy
The tape does not move when you
press an operation button.
The REC @ button does not
function/The tape does not play.
The tape does not erase completely.
The tape does not record.
Tape
Player
The audio is weak/The audio
quality is poor.
Close the cassette compartment securely.
Make sure the safety tab on the cassette is in
place.
Make sure TAPE is pressed.
Clean the erasing head (see page 25).
Replace all the batteries with new ones if they
are weak.
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette is in
place.
Clean the heads, pinch rollers and capstans (see
page 25).
Demagnetize the heads using a demagnetizer
(see page 25).
The sound is distorted.
The TYPE U] (high position) or TYPE IV (metal)
tape is being used.
Use TYPE I (normal) tape
only.
The remote does not function.
Remote
Replace all the batteries in the remote with new
ones if they are weak.
Make sure that you are pointing the remote at
the remote sensor on the player.
Remove any obstacles in the path of the remote
and the player.
Make sure the remote sensor is not exposed to
strong light such as direct sunlight or
fluorescent lamp light.
Move closer to the player when using the
remote.
After trying the above remedies, if the player still does not function properly, unplug the AC
power cord and batteries. After all the indications in the display disappear, plug the power cord
and insert the batteries again. If the problem persists, please consult vour nearest Sony dealer.
Additional information
Advertisement
Table of Contents
