Convenient Operation For Recording; Compu Program Editing; Pfoqtam Ocitting) 00 - Pioneer PD-M435 Operating Instructions Manual

CONVENIENT OPERATION FOR RECORDING
Compu program editing (Computer allocated
program editing)
Tracks are selected for both sides of the tape.
1 During stop mode, press COMPU PGM.
2 Select the disc No. with the DISC NUMBER
button.
3 Select the tape playing time with >> or <<.
Each time mi is pressed, the time will be changed in the
following sequence: 46 —> 54 -—> 60 — 74 — 90 (minutes).
With ed, the time will be changed in the reverse direction.
DISC NUMBER 4 Press COMPU PGM.
The displayed time is memorized. The player now programs
the tracks for the first side of the tape within half the selected
playing time, programs a pause, and then programs the tracks
for the second side of the tape within a half the selected
playing time. After the programming is completed, the display
shows all of the programmed tracks and their playing time in
the programmed order.
e@ If the magazine is in the player, the program contents will
not be erased even if the power is turned off. However, if
the power is turned off with an audio timer or unplugging
the power cord, the program contents will be erased.
COMPU PGM
al
m
2
Example: The tape playing time 46 minutes is selected.
e@ The programmed contents are displayed in the
programmed order.
First side Second side
COMPU PGM
c— @ f-tin02s6) [© b-0}0859
Ve EI-¢ EI-¢
v v
@ A-86 00:56 b- 09 ww 20:99
Ud
NOTE:
@ Up to 24 steps can be programmed.
e@ With discs contained 24 tracks or more, programming may not
be correctly performed.
e A disc which contains more than 24 selections sometimes
cannot be programmed properly.
15
<PRB1124>
En