Operation Mode - Hitachi PC-ARFG-E Instruction Manual

Operation
3 Air Conditioner ON
When air conditioner is on, press " " or " "
to switch below items:
"Temperature" ↔ "Mode" ↔ "Fan Speed"
↔ "Louver" ↔ "Menu".
- Temperature
- Mode
A A A A
Temp Cool
- Fan Speed
Temp Cool
- Louver
Temp Cool
- Menu
Function Menu
Screen Display Setting
Service & Installation
Contact Information
Temp Cool
5 PMML0564 rev.1 - 09/2021
Mode
Cool
Fan Speed Louver Menu
Fan Speed
L Low
Fan Speed Louver Menu
Louver
Indirect air
INDV
Fan Speed Louver Menu
Menu
(Mon) 16:30
Fan Speed Louver Menu

4.3 OPERATION MODE

Heating mode is only available when the
indoor unit supports cooling and heating.
Cooling only machine cannot support
heating.
Operation mode setting
1 Press " " or " to select "Mode".
A A A A
Temp Cool Fan Speed
2 Set the operation mode with " " or "
". The operation mode is switched in the
following order:
"Cool"↔"Heat"↔"Dry"↔"Auto"↔"Fan"
If dual setpoint is selected in auto mode,
both cooling setpoint and heating setpoint
can be selected.
By default, temperature is as follows
when the cooling/heating mode changes:
• Temperature switch from cooling mode
to heating mode: Room temperature =
Heating set temperature -1°C
• Temperature switch from heating mode
to cooling mode: Room temperature =
Cooling set temperature +1°C
?
N O T E
The function selection setting is required for "Auto"
operation. Contact your distributor for detailed
information.
Mode
Cool
Louver Menu