Related Manuals for Huskie Tools IL-MK7ND
Summary of Contents for Huskie Tools IL-MK7ND
- Page 1 OPERATOR MANUAL FOR MODEL: IL-MK7ND 6 Ton Battery Operated Inline Compression Tool WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
MODEL: IL-MK7ND THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable-related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. -
Page 4: Description
MODEL: IL-MK7ND DESCRIPTION WHAT’S INCLUDED The IL-MK7ND is a Streamline Battery-Powered EACH TOOL KIT INCLUDES THE FOLLOWING: Compression tool with a 6-ton output. There are ɨ Tool with jaw three interchangeable heads available*. ɨ 18V-2.0Ah battery pack (x2) ɨ Battery charger ɨ... -
Page 5: Safety Symbols
The term “power tool” in all warnings refers to your battery operated (cordless) power tool. Do not discard this product or throw away! For recycling information, contact 800-822-8837 IL-MK7ND - OPERATOR MANUAL... -
Page 6: Safety Information
ɨ Under abusive conditions, liquid may be ejected from battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. IL-MK7ND - OPERATOR MANUAL Copyright © Huskie Tools 2019... - Page 7 ɨ Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. ɨ To reduce the risk of injury, charge only Huskie Tools battery pack model BP-185. Other types of batteries may burst causing personal injury and damage.
-
Page 8: Operating Instructions
6. Low battery LED indicator will illuminate orange when battery has 3-5 compression cycles remain- ing. See Figure 8C. Push Release Advance Pins Trigger Trigger Battery Indicator Figure 8A. Figure 8B. Figure 8C. IL-MK7ND - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 9: Troubleshooting Guide
Connector is jammed in tool Press and hold release trigger jaws while prying tool jaws apart Release trigger is bent or mis- Consult factory for repair service aligned IL-MK7ND - OPERATOR MANUAL... -
Page 10: Maintenance Notes
MODEL: IL-MK7ND MAINTENANCE NOTES IL-MK7ND - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 11: Warranty Information
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages. - Page 12 Glendale Heights, IL 60139 Phone 800-860-6170 Fax 800-345-3767 HuskieTools.com Huskie Tools reserves the right to change this information without further notice and holds no liability for printing errors in this content. Copyright © 2019 Huskie Tools, Inc. All Rights Reserved.