Related Manuals for Huskie Tools SL-MKC7510
Summary of Contents for Huskie Tools SL-MKC7510
- Page 1 OPERATOR MANUAL FOR MODEL: SL-MKC7510 12 Ton Battery Operated Compression Tool WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
MODEL: SL-MKC7510 THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable-related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. -
Page 4: Description
MODEL: SL-MKC7510 DESCRIPTION WHAT’S INCLUDED The SL-MKC7510 is a Battery-Powered EACH TOOL KIT INCLUDES THE FOLLOWING: Compression tool with a 12-ton output. • SL-MKC7510 • 18V-5.0Ah battery pack (x2) • Battery charger • Tool bag SPECIFICATIONS Specifications Length..........6.4” (162mm) Width ............4”... -
Page 5: Safety Symbols
The term in severe injury or death. “power tool” in all warnings refers to your battery operated (cordless) power tool. Do not discard this product or throw away! For recycling information, contact 800-822-8837 SL-MKC7510 - OPERATOR MANUAL... -
Page 6: Safety Information
• Maintain tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tools operation. If damaged, have the tool repaired before use. SL-MKC7510 - OPERATOR MANUAL Copyright © Huskie Tools 2019... - Page 7 • Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. • To reduce the risk of injury, charge only Huskie Tools battery pack model BP-185. Other types of batteries may burst causing personal injury and damage.
-
Page 8: Operating Instructions
If the cycle was not completed, the LED will flash red and a series of 3 audible beeps will sound alerting the user the cycle was not completed. Remove the conductor from the tool. Figure 1 Figure 2 Figure 3 SL-MKC7510 - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 9: Troubleshooting Guide
Connector is jammed in tool Press and hold release trigger jaws while prying tool jaws apart Release trigger is bent or mis- Consult factory for repair service aligned SL-MKC7510 - OPERATOR MANUAL... -
Page 10: Maintenance Notes
MODEL: SL-MKC7510 MAINTENANCE NOTES SL-MKC7510 - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 11: Warranty Information
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages. - Page 12 Glendale Heights, IL 60139 Phone 800-860-6170 Fax 800-345-3767 HuskieTools.com Huskie Tools reserves the right to change this information without further notice and holds no liability for printing errors in this content. Copyright © 2019 Huskie Tools, Inc. All Rights Reserved.
Need help?
Do you have a question about the SL-MKC7510 and is the answer not in the manual?
Questions and answers