Related Manuals for Huskie Tools PRO LINE REC-MK7430
Summary of Contents for Huskie Tools PRO LINE REC-MK7430
- Page 1 OPERATOR MANUAL FOR MODEL: REC-MK7430 12 Ton Battery Operated Compression Tool WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
MODEL: REC-MK7430 THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable-related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. -
Page 4: Description
Connector Range 1. Integrated LED work light Lugs ..........750 MCM Al/Cu 2. Release trigger Splices ........600 MCM Al/Cu. 3. Low battery indicator 4. 18V-5.0Ah Li-Ion Battery 5. Advance Trigger REC-MK7430 - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 5: Safety Symbols
MODEL: REC-MK7430 SAFETY SYMBOLS You will see this symbol throughout this manual. Read all instructions and This purpose of this symbol is to call your attention safety information detailed to hazards and/or unsafe practices that have the in this operator manual prior potential to cause injury or property damage. -
Page 6: Safety Information
• Maintain tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tools operation. If damaged, have the tool repaired before use. REC-MK7430 - OPERATOR MANUAL Copyright © Huskie Tools 2019... - Page 7 • Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. • To reduce the risk of injury, charge only Huskie Tools battery pack model BP-185. Other types of batteries may burst causing personal injury and damage.
-
Page 8: Operating Instructions
To turn auto retraction or off, remove rubber grommet and use a flat blade screwdriver to rotate the indicator 90 degrees to either position as shown below: ON OFF Lift Grommet REC-MK7430 - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 9: Troubleshooting Guide
MODEL: REC-MK7430 TROUBLESHOOTING GUIDE Before You Begin 1. Make sure that the battery is charged. Recheck the battery after several minutes to make sure the battery is holding its charge. 2. Use a nonflammable contact cleaner or pencil eraser to clean the electrical contacts on the battery and tool. -
Page 10: Maintenance Notes
MODEL: REC-MK7430 MAINTENANCE NOTES REC-MK7430 - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 11: Warranty Information
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages. - Page 12 Glendale Heights, IL 60139 Phone 800-860-6170 Fax 800-345-3767 HuskieTools.com Huskie Tools reserves the right to change this information without further notice and holds no liability for printing errors in this content. Copyright © 2019 Huskie Tools, Inc. All Rights Reserved.