Id
Parameter
Parameter
Gas type
G1
selection
Ignition
G2
power
The setting of this function is used to adjust the boiler in order to function
with the correct type of gas.
To access this regulation, once having entered the programming mode, press
the button (2) for 4 seconds. To exit, press button (2) again 4 seconds.
Description
Range
Default
(ref. 16 Fig. 34)
nG - Methane
The same as
lG - LPG
the type of gas
Ci - China
being used
Set according to
0 - 70 %
factory
inspection
43