Changing The Needle - Husqvarna VIKING Designer Epic 3 User Manual

Changing the Needle

1. Use the hole in the multipurpose tool to hold the needle.
2. Loosen the needle screw with the universal tool.
3. Remove the needle.
4. Insert the new needle using the multipurpose tool. Push
the new needle upwards with the flat side away from you
until it will go no further.
It is very important that the needle is inserted all the
way in order for the automatic needle threader to work
properly.
5. Tighten the needle screw with the universal tool.
Use the rounded end of the universal tool to loosen and
tighten the screw. The universal tool is magnetic and will hold
the screw, making it easy to replace and less likely to be lost.
32 2 Preparations