Camera And Projection Settings; Presser Foot Recognition; Adjust Camera; Adjust Projection - Husqvarna VIKING Designer Epic 3 User Manual

Camera and Projection Settings

Presser Foot Recognition

The presser foot recognition feature is using the camera and
artificial intelligence (AI), with a neural network that makes
predictions, so that your machine can recognize which
presser foot is attached. If the presser foot predicted to be
attached differs from the one recommended for the selected
stitch, this will be indicated in the information area.
Note: The performance of the presser foot recognition feature can be
affected by eventual alterations of a presser foot's appearance; due to
room lighting, fabric reflectivity properties, position fluctuations,
obstructions or physical alterations of the presser foot's surfaces.

Adjust Camera

After frequent use, transportation etc, the camera might need
to be adjusted.
Touch fine tune to start the adjustment, then follow the
directions given on your screen.

Adjust Projection

After frequent use, transportation etc, the projector might
need to be adjusted to perform exact projection.
Touch fine tune to start the adjustment, then follow the
directions given on your screen.
146 12 Settings