Chevrolet Colorado 2024 Owner's Manual page 301

300 Vehicle Care
Tilt the retainer and pull it through the
center of the wheel along with the cable
and spring.
7. Put the spare tire near the flat tire.
Bed-Mounted Spare Tire
1. Spare Tire
2. Wheel Mount Handle
3. Bushing
1. Remove wheel mount handle (2) and
bushing (3) by turning handle
counterclockwise. Keep handle and
bushing together and set aside for
later use.
2. Remove the spare tire (1) from the truck
bed. Seek assistance as needed.
3. Put the spare tire near the flat tire.
Removing the Flat Tire and Installing the
Spare Tire
Use the following pictures and instructions
to remove the flat tire and raise the vehicle.
1. Jack
2. Wheel Blocks
3. Jack Handle
4. Jack Handle Extensions
5. Wheel Wrench
6. Jack Spacer
1. Do a safety check before proceeding.
Make sure all wheels are on level
ground. See If a Tire Goes Flat 0 297.
2. If the wheel has a center cap that covers
the lug nuts, place the chisel end of the
wheel wrench in each of the slots in the
cap, and gently pry it out.