Chevrolet Colorado 2024 Owner's Manual page 124

3. If no mobile phone is connected, the
Manage Phones screen will display.
If another mobile phone is connected
already, touch Settings > Connections >
Phones.
4. Touch Manage Phones to display the
Phones screen.
5. Touch Add Phone.
If a phone has been previously added or
disconnected, the "Add Phone" card will
just be a "+" card.
6. Follow the on-screen prompts to pair the
phone.
7. Follow the instructions on the phone to
confirm the six-digit code showing on
the infotainment display and touch Pair.
The code on the phone and infotainment
display need to be acknowledged for
pairing to be successful.
8. See the phone manufacturer's user guide
for information on this process. Once the
phone is paired, it will show as
Connected.
9. If the vehicle name does not appear on
your phone under the "other devices" or
"available devices" menu, there are a few
ways to start the pairing process over:
. If a previously paired mobile device is
not connecting to the Bluetooth
system, try forgetting the mobile
device on the vehicle's infotainment
system and also forgetting the
vehicle in the Bluetooth settings of
the mobile device. Then repeating the
pairing process. See "Deleting a
Paired Phone" below for removing
the phone from the Bluetooth
system. See the phones manufactures
user guide for removing the
infotainment system from the phone.
. Turn Bluetooth off then back on, on
your phone.
.
Go back to the beginning of the
Phone menus on the infotainment
display and restart the pairing
process.
. Turn the phone off and then back on.
. Reset the phone, but this step should
be done as a last effort.
Infotainment System
10. If the phone prompts to accept
connection or allow phone book
download, touch Always Accept and
Allow. The phone book may not be
available if not accepted.
11. To pair additional phones, touch Settings
> Connections > Phones.
First to Connect Paired Phones
If multiple paired phones are within range
of the system, the system connects to the
paired phone that is set as First to Connect.
To enable a paired phone as the First to
Connect phone:
1. Make sure the phone is turned on.
2. Touch the Settings icon on the
infotainment home screen.
3. Touch Connections.
4. Touch Phone.
5. Touch Options under the connected
phone.
6. Touch First to Connect from the phone's
settings menu and set First to Connect
to On.
123