Advertisement
SECTION III: THE EFFECTS
@ COMPRESSOR (Digital)
a distortion-free sustain effect is produced.
O SUSTAIN (0 to 15)
Expands low input signals and adjusts the range (time)
over which the volume is made more uniform. Larger
values mean longer sustain. With smaller values of this
parameter, this effect can be used as a "limiter" to
suppress only the highest input signals.
@ OVERDRIVE/DISTORTION (Analog)
distortion effects that you can tailor to match your needs.
© MODE (1/2/3/4/5)
Selects the distortion type. Overdrives 1 and 2 give you
a mild distortion that sounds like it came from a tube
amp. Distortions 1 and 2 give you a harder sound.
To really fatten up the sound, Mode 5 reverses the
order of distortion and equalizer in the effects chain so
you can pre-equalizer the distortion.
Mode 1: Overdrive 1
Mode 2: Overdrive 2
Mode 3: Distortion 1
Mode 4: Distortion 2
Mode 5: Pre-Equalizer + Overdrive 2
12
1
COMPRESSOR
SUSTAIN
(0-15)
ATTACK
(0-15)
LEVEL
(0-15)
© ATTACK (0 to 15)
Adjusts the "picking" time and attack intensity. Larger
values make the start of each note cleaner and improve
articulation of the sound.
© LEVEL (0 to 15)
This parameter adjusts the volume of the compressor.
This is used for adjusting the balance between effects
as they are turned on and off.
*
OVERDRIVE
DISTORTION
MODE
(1-5)
DRIVE
(0-15)
TONE
(-7-7)
LEVEL
{0~15)
,
i
© DRIVE (0 to 15)
This parameter adjusts the sound of the distortion. The
larger this number, the more intense the distortion
effect.
© TONE (-7 to +7)
This parameter adjusts the tone color of the Overdrive/
Distortion. Positive values boost the treble, making it
brighter.
svt
© LEVEL (0 to 15)
This parameter adjusts the volume of the Overdrive/
Distortion. This is used for adjusting the balance
between effects as they are turned on and off.
Advertisement
