Advertisement
SECTION IV: REFERENCE
@ BEFORE DECIDING THERE'S A
PROBLEM...
"If no sound is produced, or if things are not working as
expected, check the following items. Do not attempt to
service the product beyond that described in the user-
maintenance instructions.
No Sound/Low Level Sound
@ Are other devices hooked up correctly?
@ Is the connected amp or mixer turned off, or maybe the
volume is set too low?
@ Are the patch settings set correctly? This includes things
like checking to see that the parameter LEVEL settings
are not set too low.
@ Is the expression pedal volume all the way down?
Can't Select a Patch
@ The patch won't change until you've depressed a
Number Pedal.
@ 1s Bypass on?
@ Are you in the Manual Mode?
@ Are you in the Edit Mode?
16
fm RETURNING TO THE FACTORY
SETTINGS — INITIALIZATION
You can return all the settings to the way they were at the
factory (initialization). There is also a way to initialize just
one patch, or all the patches.
{Initialize Just One Patch))
@) Turn the power off.
@ Press and hold the PARAMETER [Aland [p>] buttons
and turn the power on again.
The EDIT/ESC indicator will flash.
@ Select the patch you want to initialize.
See page 6 for more information on selecting patches.
* To cancel the initialization at this time, press the
button. You'll be moved to the Play
Mode.
@ Press the| WRITE | button.
The selected patch will be initialized.
© Press the| EDIT/ESC| button.
You'll be moved to the Play Mode. If you want to
continue initializing individual patch numbers, simply
repeat steps @) and @.
(Initialize All Patches))
@ Turn the power off.
@® Press and hold the PARAMETER [¥]and [<q] buttons
and turn the power on again.
The EDIT/ESC indicator will flash and the display will
read "1.10".
* To cancel the initialization at this time, press the
button. You will be returned to the Play
Mode.
@ Press the| WRITE | button.
When the initialization is complete, you'll be moved
to the Play Mode.
Advertisement
