Advertisement
SECTION I: PLAYING THE ME-6
Wi PLAYING THE ME-6: PLAY MODE
(What's a Patch?)
The ME-6 can store 25 different combinations of effects
settings and parameters in memory. Each collection of
settings is called a "patch". These 25 patches are split up
into five memory "banks", each containing five patches.
Each patch in the ME-6 is identified by a combination of a
bank number and a patch number within that bank.
You'll use this system to "call up" the patches you need
during play.
* When you first turn the power on, BANK: 1 NUMBER:
1 is automatically selected.
|3 | 8 | 13 | 12 | 23 |
a
14 | 19] a
NUMBER
see eS
|e
( SELECTING A PATCH
1.
Select the Bank
@ Depress the Bank Pedal.
Depressing a Number Pedal at this point only changes the
The bank number will flash in the display.
bank number, it does not select a new patch. The patch is
not actually selected until you choose a number within
@ Depress a Number pedal.
that bank.
You switch to the desired bank number by
* Depress the Bank [B] Pedal again if you wish to return
depressing the corresponding Number Pedal
to the original patch without changing banks.
(1 through 5).
2. Select the Number
Depress the desired Number Pedal (1 through 5), and
the display will change to that number. The patch
identified by that bank/number combination is now
selected.
* If you wish to select a different patch within the
same bank, you don't have to reselect the bank;
just depress the appropriate Number Pedal.
= ee
=e
ren
aaa
a
NUMBER
eo
an
ae | ae
saiineen aa ro eee ie porhctory i
ee
"INDICATOR
Advertisement
