Table of Contents
Advertisement
PROGRAMMING
1. MODE BUTTON
Cycles through the controller's
modes: OFF, ON, AUTO (1
trigger), VPD (1 trigger), TIMER
(to OFF), CYCLE (ON and OFF).
4. PROBE TEMPERATURE
Displays the current temperature
that the probe is measuring. Shows
"--" if no probe is plugged in.
7. CURRENT MODE
Displays the controller's current
mode. Pressing the mode button
cycles through the available modes.
10. USER SETTING
Displays the value of your current
mode. Use the up or down
buttons to adjust the value.
24
11
5
6
7
9
2
1
Screen shown: CLOUDFORGE T3
2. UP/DOWN BUTTONS
Adjusts the value of your current
mode. The up button increases
and down button decreases
the setting. Hold both to reset
values to OFF/Default.
5. PROBE HUMIDITY
Displays the current humidity that
the probe is measuring. Shows
"--" if no probe is plugged in.
8. CURRENT LEVEL
Displays your humidifier's current
moisture level.
11. ALERT ICONS
Displays alerts and statuses of
the onboard controller, including
the controller lock, CLIMATE
alert, and TIMER alert.
8
4
10
3
3. SETTING BUTTON
Cycles through the controller's
settings: °F / °C, CALIB. T° /
H% / kPa, and LEAF OFFSET.
6. PROBE VPD
Displays the current VPD that
the probe is measuring. Shows
"--" if no probe is plugged in.
9. COUNTDOWN
Displays the countdown of the
TIMER or CYCLE modes that
activates or deactivates your
humidifier. TO ON shows the
amount of time left before your
humidifier turns on. TO OFF
shows the amount of time left
before your humidifier turns off.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CLOUDFORGE and is the answer not in the manual?
Questions and answers
Can I have clear instructions on how to set my machine to keep my environment to 60% humidity please, cloudforge t3 gen 2
To set the AC Infinity Cloudforge T3 Gen 2 to maintain 60% humidity, follow these steps:
1. Access the Smart Controls: Use the controller or app connected to the humidifier.
2. Set the Target Humidity: Adjust the target humidity level to 60%. This ensures the unit will maintain that level.
3. Enable Auto Mode: Use the auto mode to allow the humidifier to turn on and off as needed to maintain the set humidity.
4. Check Settings: Confirm there are no hidden triggers, automations, or faulty settings that could override the target humidity.
This setup ensures the humidifier operates efficiently and maintains the desired 60% humidity level.
This answer is automatically generated
my ac infinity Cloudforge T3 gen 2 humidifier display keeps saying water level is low even when filled to top
The AC Infinity Cloudforge T3 Gen 2 humidifier may display a low water level alert even when filled to the top if the water tank is lifted or not properly seated. Lifting the tank triggers the alert, which disappears once the tank is correctly placed back into position.
This answer is automatically generated