Download Print this page

Valcom V-9933A User Manual page 3

Noise sensing volume control

Advertisement

No page
Volume incorrect with no background noise
Unable to hear with full background noise
Too loud with full background noise
Loud squeal when paging
*Use lineman's test set (monitor setting) to check for audio.
Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and
service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement,
repair or refund of any such defective device within the warranty period, provided that:
1.
inspection by Valcom, Inc. indicates the validity of the claim;
2.
the defect is not the result of damage, misuse or negligence after the original shipment;
3.
the product has not been altered in any way or repaired by others and that factory sealed units are unopened (A
service charge plus parts and labor will be applied to units defaced or physically damaged);
4.
freight charges for the return of products to Valcom are prepaid;
5.
all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (Major repairs
will be subject to additional charges for parts and labor).
This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom,
Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the
buyer in connection with the purchase, operation or use of the product.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the
carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the
F.O.B. point.
5614 Hollins Road
Roanoke, VA 24019-5056
Phone: (540) 563-2000
FAX: (540) 362-9800
1)
Check -24VDC and Ground to unit and to one-way speakers.
2)
Check * for audio at tip and ring input to V-9933A.
3)
Check * for audio at tip and ring output from V-9933A.
1)
With no background noise, access page and adjust volume at page
control unit or at one-way amplified speakers.
1)
Turn sensitivity adjust (Microphone gain) control clockwise in small
increments.
Wait 20 seconds before accessing page to test.
1)
Turn microphone gain control counter clockwise in small increments.
Wait 20 seconds before accessing page and testing.
1)
Relocate phone or speaker.
2)
Install noise canceling transmitter on phone.
3)
Readjust page level.
VALCOM LIMITED WARRANTY
Headquarters:
Valcom, Inc.
3
In Canada
CMX Corporation
35 Van Kirk Drive #11 and 12
Brampton, Ontario L7A 1A5
Phone: (905) 456-1072
FAX: (905) 456-2269

Advertisement

loading