Advertisement
©
Paper guide plate
|
) Carefully position the serial interface board
f
G
screw and the two standoffs as depicted in
y
the diagram below.
interface
board
|
(KX-PS13)
(9) Secure the serial interface board (KX-PS13)
with the three red screws
A and one red
screw B.
Serial interface
board (KX-PS13)
Red screw B into the hexagonal screw
(10) Make sure that the DIP switch settings you
select
match
your
compute's
serial
parameters (refer to Section 5).
(11) Replace the upper cabinet, smoked plastic
cover, top cover and the platen knob.
Note:
After installation, the following parts will be of no
use.
|
Red SCreW Bi sich Bee
re
HEX AGOMAl SCVOW widicicticosseeterwonsvenccreancesmantere aya 1
Advertisement
