Advertisement
(E) KX-P2180/KX-P2123/KX-P2124
Note: The illustrations you see are drawn from KX-P2123.
Top cover
Platen knob
Upper cabinet
Connector cover
Hexagonal screw
14
(1)
Remove the smoked plastic cover, top cover
and the platen knob.
(2)
To remove the upper cabinet, remove the
two screws from the front side in the printer.
(3)
Carefully raise and remove the upper
cabinet.
(4)
Remove the connector cover from the rear
of the upper cabinet, score the edges of the
connector cover and snap out.
(5)
Remove the screw from the bottom panel
and install the hexagonal screw.
Advertisement
