Table of Contents
Advertisement
Programming the Memory Feature
1. Place the ignition in the ON/RUN position (do
not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat and radio station
presets).
3. Push and release the (2) button on the
memory switch, and then push the desired
memory profile button (1 or 3) within five sec-
onds. A beep will sound to confirm the
memory profile has been successfully stored.
Use this QR code to access your
digital experience.
HEAD RESTRAINTS
Did you know your vehicle is equipped with front
driver and passenger head restraints that can be
adjusted two different ways?
Head restraints are designed to reduce the risk of
injury by restricting head movement in the event
of a rear impact. Head restraints should be
adjusted so that the top of the head restraint is
located above the top of your ear.
Scan me
1 — Removal Button
2 — Adjustment Button
•
To raise the head restraint, pull upward on the
head restraint.
•
To lower the head restraint, push the adjust-
ment button, located at the base of the head
restraint, while pushing downward on the head
restraint.
The outboard head restraints can be adjusted up
or down.
Rear Outboard Head Restraint Button
To raise the outboard head restraint, pull upward
on the head restraint. To lower the head restraint,
push the adjustment button, located at the base
of the head restraint, and push downward on the
head restraint.
NOTE:
The rear center head restraint is not adjustable or
removable.
WARNING!
•
All occupants, including the driver, should not
operate a vehicle or sit in a vehicle's seat until
the head restraints are placed in their proper
positions in order to minimize the risk of neck
injury in the event of a crash.
•
Head restraints should never be adjusted
while the vehicle is in motion. Driving a
vehicle with the head restraints improperly
adjusted or removed could cause serious
injury or death in the event of a collision.
INTERIOR
27
Advertisement
Table of Contents
