Table of Contents
Advertisement
GENOAD24QM3-2L2T/BCM
3.8 Exit Screen
Save Changes and Exit
When selecting this option, the following message "Save configuration changes and exit
setup?" will pop-out. Press <F10> key or select [Yes] to save the changes and exit the UEFI
SETUP UTILITY.
Discard Changes and Exit
When selecting this option, the following message "Discard changes and exit setup?" will
pop-out. Press <ESC> key or select [Yes] to exit the UEFI SETUP UTILITY without saving
any changes.
Save Changes
When selecting this option, the following message "Save changes?" will pop-out. Press
<F7> key or select [Yes] to save all changes.
Discard Changes
When selecting this option, the following message "Discard changes?" will pop-out. Press
<F7> key or select [Yes] to discard all changes.
Load UEFI Defaults
Load UEFI default values for all the setup questions. F9 key can be used for this operation.
89
Advertisement
Table of Contents
