Page 2
Make sure the coupling flanges are turned so the brass nipples are at the 12 o’clock position. This is necessary to make sure the faucet is level. 6. Apply thread sealant tape or pipe joint compound to the other side of each of the two threaded nipples. Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com...
Page 3
18. Loosen the spray head hook (O) and center it on the riser pipe. Tighten when it is in place. 19. Install faucet spout (F) onto add-on faucet body (H) (Figure 1). Figure 2 Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com...
Page 8
Warranty. Equipment covered by the Warranty shall only be warranted in connection with its original installation only. Krowne will only be obligated to honor the warranty set forth in these terms and conditions upon receipt of full payment for the equipment.
Need help?
Do you have a question about the Royal Series and is the answer not in the manual?
Questions and answers