Page 2
4. From the front of the sink, insert the threaded nipples into the faucet holes in the sink. Make sure the coupling flanges are turned so the brass nipples are at the 12 o’clock position. This is necessary to make sure the faucet is level. Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com...
Page 3
15. Loosen the spray head hook (K) and center it on the riser pipe (L). Tighten when it is in place. 16. From the back of the sink, install the water supply lines and tighten properly. Figure 2 Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com...
Page 8
Warranty. Equipment covered by the Warranty shall only be warranted in connection with its original installation only. Krowne will only be obligated to honor the warranty set forth in these terms and conditions upon receipt of full payment for the equipment.
Need help?
Do you have a question about the ROYAL Series and is the answer not in the manual?
Questions and answers