Grounding The Generator - Gentech GP6500I Operator's Manual

Table of Contents

Advertisement

11. Do not place the battery in a microwave oven or pressurized container.
12. Do not use the battery in combination with primary batteries (such as dry cell batteries) or
batteries of different capacity, type, or brand.
13. Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any way. If the battery is in use or being recharge, remove it from the
device or charger immediately and discontinue use.
14. Do not use more than one battery in parallel or in series.
15. Do not press on indicator button longer than few seconds.
16. Do not dispose the battery before completely discharge.
17. Do not charge the battery by charging voltage over 15.0V.
18. Do not charge the battery by charging with an automatic "de-sulfation mode" function.
19. The battery will fail if over charged, it may happen to deform or fume.
20. Please fix the battery terminal with original screws and nuts securely.
21. The cranking performance will be affected when environment temperature lower than.
22. Keep out of reach of Children and Pets.

GROUNDING THE GENERATOR:

6.9.
When grounding the generator connect the grounding lug of the generator to the
6.9.1
grounding spike.
If such grounding conductor or ground electrode is unavailable, connect the grounding
6.9.2
lug of the generator to the grounding terminal of the electric tool or appliance.
CONTROL PANEL FOR GP6500I:
PANEL INTRODUCTION:
(1)
Recoil Start
(2)
Engine Start / Stop
(3)
Out Put Indicator
(4)
Overload Alarm
(5)
Data Display
(6)
Circuit Breaker 22A
(7)
AC Receptacles 230V
(8)
Grounding Nut
(9)
AC Receptacles 230V
(10)
Parallel Operation Outlets
(11)
DC 5V USB, 3.0/3.6A
(12)
Engine Switch
(13)
Low Idle
3
4
1
2
13
12
9
GROUNDING
SPIKE
5
6
11
10
9
8
7

Advertisement

Table of Contents
loading

Table of Contents