Table of Contents
Advertisement
10.
Inspection, day-to-day maintenance and
conservation
All maintenance should be done by a manufacturer-authorized
service or a person empowered by the manufacturer.
1) Coin acceptor maintenance
Coin acceptor should be cleaned periodically (every 2000 - 3000 credits). Best
way to clean it is by using simple cloth slightly soaked in distilled alcohol.
Focus should be placed on cleaning the area where coins slide through (make
sure sliding part is in open position). Do not use acetone or dissolvent.
2) Mechanism maintenance
Periodically, once a month or even more often if needed, the moving parts
(chain, bearing, grease fitting of rolling bearing) have to be lubricated with
lubricant.
3) Fuse change
The machine is equipped with a one time-delay fuse (motor security). A
blown fuse has to be exchanged for a new fuse of the same type: 125V/8A
time delay ceramic fuse.
To change the fuse unscrew
two screws (1) and then
take off the cover and
unscrew the fuse (2).
Page 20
Advertisement
Table of Contents
