Assembly And Installation - Kalkomat Kiddie ride Manual

8. Assembly and installation

Kiddie ride machine is supplied in two parts: base and top lid.
The top lid has to be mounted on the housing:
- position the lid,
- insert screws,
- connect the lighting cable to the main board.
Next, close all machine door and connect the power cord to the socket.
The machine has to be installed in its location:
- the machine has to be placed on hard stable ground in a way that its
base is properly leveled. The level should be acquired using spirit
level; the adjustment is done by tightening screws (plates under the
base),
- it is important that the middle housing stands upright, as in other
case the seat reel or coin acceptor might not work properly,
- during installation it is important to watch the power cord so that it
does not get pressed down,
- the machine, once connected to the power supply, is ready to work.
Page 16