AOC L22W851B Service Manual page 12

22'' LCD TV
1> PC input:
Note: For the connection between the PC and the TV, (see Figure 1) below.
(1)How to connect to the PC mainframe:
VGA interface – Connect the VGA signal cable supplied with the TV to the D-sub interface at the rear of the TV as
in. (Figure 1)
(2)How to connect the audio cable:
Connect the PC audio cable supplied with the TV to the TV's PC Audio Input as in. (Figure 1)
Note: If no signal is present on the VGA screen, the TV will enter into standby mode automatically after 3
seconds.
2> HDMI input:
HDMI is the leading new standard for Digital video and audio interconnection. To the HDMI connector you can
connect HDMI devices such as a Set Top Box or compatible DVD-R or DVD player with HDMI export, or
DVI-equipped devices like a computer. So you can display high-definition pictures on this TV in the digital form.
(1) How to use HDMI:
Notes:
1.Your TV supports HDCP(High-bandwidth Digital Content Protection).This Is a system for protecting DVD content
outputted via DVI from being copied. It provides a secure digital link between a video source (DVD, PC, etc.)
and your TV. Content is encrypted at the source device to prevent unauthorized copies from being made.
2.Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display.
3.In case no signal is detected from your HDMI device, turn off the HDMI device and then on again.
1. Connect one HDMI to the "HDMI" port and connect the other HDMI to device with
HDMI export as left figure.
Select the T-Line button,change source button can come into HDMI source.
3. The HDMI connectors allow the following TV and monitor display mod:
SDTV 720x576i, 50Hz /720x480i, 60Hz
EDTV 720x576p 50Hz /640x480p 60Hz
HDTV 1920x1080i 50/60Hz
1280x720p 50/60Hz
VGA 640x480 60Hz
(Figure 1)
12
AOC L22W851B