Advertisement
CONNECTIONS
Setting Up the AM Antenna
* insert the claw on the bottom of the antenna into the groove in
the teg.
® Place the antenna on a level surface and rotate it to locate the
orientation that yields the best reception.
* Use the attachment hole in the leg to screw to wall or other
location, then insert the claw on the bottom of the antenna into
the groove in the feg (fixing the antenna in the direction that gives
the best reception).
Lead wire
Lead wire
POWER-CORD CAUTION
Precaution regarding installation position of cassette
deck.
If the cassette deck is installed in the (4) positions shawn in the
drawing beiow, it may be adversely affected during playback. If
possible, it's better to install it in the @ position.
Handle the power cord by the piug. Do not pull out the piug by tugging
the cord and never touch the power cord when your hands are wet as
this could cause a short circuit or electric shock. Do not place the unit,
a piece of furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The power cords
should be routed such that they are not likely to be stepped on. A
damaged power cord can cause fire or give you an electrical shock.
Check the power cord once in a while. When you find it damaged, ask
your nearest PIONEER authorized servicé center or your dealer for a
replacement.
8
<ARB1378>
Advertisement
