Advertisement
VSX-511S REMOTE CONTROL OPERATION
(Tv)
(VCR)
Button functions are the same as Pioneer's unified remote control code
functions, so refer to page 38 concerning TV functions, and page 37
concerning VOR functions.
NOTE:
® If there is a remote control operation bution for a function your TV
or VCR does net have, operation is not possible.
* Depending on the kind of remote contro! signal, it may not be possible
to preset TV FUNC button for TV operation.
{Procedure for presetting]
1. Press the EDIT button to switch to the EDIT mode.
2. Press one of the CONTROL MODE buttons (VCR 1, VCR 2, or TV).
3. Press one of the buttons 1 to 12.
* One kind of cade is preset.
* To continue presetting, repeat operation procedure 2, 3.
4. Press the EDIT button.
® The EDIT made is canceled.
5. Confirm that the component (TV or VCR) can be operated by the
preset code,
\f operation is not possible, repeat the procedure from step 2, and
press a different number button (1-12) at step 3 to search for a
preset code that enables operation. Refer to the diagram on this
page.
[Operation example]
As a preset example, here is an explanation of how to preset in VCR 1.
1. Press the EDIT button.
* The VCR 1, VCR 2, and T¥ CONTROL MODE buttons flash in
sequence.
2. Press the VCR 1 CONTROL MODE button.
* Only the VCR 1 button flashes.
3. Press one. of the buttons 1 to 12.
* For example, if you press button 1, the remote control signal
format selected with VCR1 operation button 1 is preset.
The CONTROL MODE buttons light in sequence (indicating that
registration has been completed), and then the VCR 1, VCR 2,
and TV buttons flash in sequence. (Returning to the condition in
procedure 1).
4. Press the EDIT button.
® The EDIT made is canceled.
42
<ARB1378>
5. Point the remote control at the sensor window of the VCR you
want to operate and press an operation button to confirm that
operation is possible.
* tf operation is possible, presetting has been completed.
® If operation is not possible, repeat operations from step 2, selecting
a different number button (1 to 12) at step 3.
if there is a button among buttons 1 to 12 that cannot operate, press
the EDIT button once more to cancel the EDIT mode, and memorize
| in the LEARN mode.
~
NOTE:
® After pressing the EDIT button, if you do not press a button within
about one minute, the EDIT mode is canceled.
* After presetting, you can use the LEARN mode
ta memorize a
command in a preset button, but the preset signal is erased.
° After memorizing in the LEARN mode, if you preset operations under
specified buttons, signals memorized in the LEARN mode are cleared.
Remote control codes of other manufacturers preset in
the preset
Manufacturer
TV
VCR
|
ib
RCA
1, (10)
(1), (6)
ZENITH
3
(3), (4)
GE
8, (11), (1)
(1), (8)
SONY
4
4
TOSHIBA
5
5, (9)
HITACHI /8, (10)
6
PHILIPS.
7
=
Jvc
_
7
PANASONIC
8
8
|
MITSUBISHI
8, (10)
9
|
SANYO
-
10, (12)
SHARP
{2)
2
GOLD STAR
i
(10)
(11)
MAGNAVOX
(7), {10}, (12)
(8), (9)
SYLVANIA
(7), {10}, (12)
(8), (9)
QUASER
8
8
FISHER
-
12, (10)
WARD'S
{2}, (7), (10), (19)
(2)
i
Advertisement
