Advertisement
Only multi-voltage modeis are provided with these switches. U.S.,
Canadian, European, U.K. and Australian models are not provided with
these switches.
Mains voltages in Saudi Arabia are 127 V and 220 V only. Never use
this model with 110 V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel. Before your
model is shipped from the factory, these switches are set to the power
requirements of the destination. Check that they are set properly before
plugging the power cord into the household wail socket. If the voltage
is not properly set or if you move
to an area where the voltage
requirements differ, adjust the selector switches as follows.
1. Use a medium-size screwdriver.
2. First, insert a screwdriver in the groove of the voltage selector at
the right, and adjust so that the tip of the groove points to the voltage
value of your area.
3. Next, insert a screwdriver in the groove of the voltage selector at
the jeft and adjust until the voltage is the same as at the right.
TWO
VOLTAGE
SELECTORS
110V
120-127V
gfe
220V
240V
11O¥
120-427V
SEE
INSTRUCTION
MANUAL
CAUTION: TWO VOLTAGE SELECTORS
ac tov | AC 120 T ac 220 | ac 240v
Dr @y Or
110V
| 120-127¥ | 220V
TeV
1200-1274
x
A
-Y
cu
ie
x«K
NOTE:
Both switches must be in the same switch
setting; otherwise, unit can be damaged.
VOLTAGE
SELECTORS
4
<ARB1378>
CHANNEL STEP/FM DE EMPHASIS SWITCH |
(Not available on U.S. and Canadian models)
The unit has been factory preset to the channel allocation and de-
emphasis value for the area in which it is to be sold, if these values are
set incorrectly, the frequency display may stop at the wrong frequency,
or sound may be distorted, resulting in an inability to reproduce reception
signals at their proper sound quality. For this reason, be sure to confirm
that the values are set correctly before first using the unit.
[100 kHz/10 kHz/75 ys] position:
Set to this position for areas with an FM reception step of 100 kHz,
AM 10 kHz, and de-emphasis 75 xs.
{50 kHz/9 kHz/50 us) position:
Set to this position, for areas with an FM reception step of 50 KHz,
AM 9 kHz, and de-emphasis 50 ys.
NOTE:
When unsure about the channel allocation and de-emphasis values for
your area, consult your dealer for correct information.
CHANNEL STEP/
FM DE-
EMPHASIS
SOkHz
/50uS —@
e~ SkHz
100kHz—~®
®-10kHz
{75x48
FM
AM
Advertisement
