Residual Risk; Before Use; Installation; Finding An Installation Site - Parkside 365023 2204 Translation Of The Original Instructions

■ Always use original spare parts for repairs.
Non-original spare parts can cause serious
damage.
■ When carrying out maintenance, adjustment
and repair work, always disconnect the
compressed air hose reel from the compressed
air supply first.
■ Do not make any modifications to the
compressed air hose reel.
■ Do not use the compressed air hose reel unless
it is in perfect condition. If in doubt, consult a
specialist before using the appliance.
■ Have all repairs carried out by qualified
professionals.
■ Never transport the compressed air hose reel
by holding onto the hoses.
■ Always hold the hose firmly in place when
disconnecting it from the compressed air source
or a compressed air tool.

Residual risk

Even if the appliance is operated properly, there
will still be residual risks. The following hazards
may occur in connection with the construction and
design of this compressed air hose reel:
– Danger caused by compressed air hoses
thrashing around.
– Risk of tripping due to compressed air hoses
lying around.
Reduce the residual risks by using the appliance
carefully and in accordance with the instructions.
■ 4 │ GB │ IE

Before use

■ Remove all parts from the packaging and check
whether the compressed air hose reel or the
individual parts are damaged. If this is the case,
do not use the compressed air hose reel.
Contact the manufacturer at the specified
service address.
■ Remove all protective films and other transport
packaging.
■ Check that the delivery is complete.

Installation

Finding an installation site

■ Mount the compressed air hose reel on a suit-
able ceiling or wall; use of the compressed air
hose reel without mounting is not permitted.
■ Select a location for mounting the compressed
air hose reel where it will not cause an obstruc-
tion.
■ With ceiling mounting, a mounting height of at
least 2.5 metres should be observed.
■ You will need the following tools to mount the
appliance: a drill, a suitable drill bit and a
screwdriver.
Mounting the compressed air
hose reel
WARNING! RISK OF INJURY!
► Incorrect installation of the compressed air
hose reel can lead to injuries.
■ Make sure that there are no cables or pipes at
the installation site. If necessary, use a detector
or contact a specialist.
■ Also observe the safety instructions for the drill
that is used.
NOTE! RISK OF DAMAGE!
► Incorrect installation can lead to damage.
■ Make sure that the support material (wall) at
the installation location is strong enough to
support the weight of the compressed air hose
reel. If you have any questions, please contact
a specialist.
PDST 10 B3