Table of Contents
Advertisement
3. Connect a video cable.
NOTE: The monitor will automatically determine which inputs have valid video signals. The inputs can
be selected by pressing the Menu button to access the On-Screen Display (OSD) menu and selecting
Input Control.
•
Connect one end of a VGA cable to the VGA connector on the rear of the monitor and the other end
to the VGA connector on the source device.
•
Connect one end of an HDMI cable to the HDMI connector on the rear of the monitor and the other
end to a HDMI connector on the source device.
NOTE: Use a high Speed HDMI cable. High speed HDMI cables can handle definition beyond 1080p.
Check the computer environment if you cannot hear audio in HDMI mode. Some computers require you
to manually change the default audio output to HDMI.
If you want to use HDMI-PC mode, you must set the input label to PC mode.
When HDMI PC is used, a compatibility problem might occur.
•
6
1
Getting Started
Advertisement
Table of Contents
