Interpretation Of Results - Matco Tools MBT2415 Manual

Battery electrical system analyzer
Hide thumbs Also See for MBT2415:
Table of Contents

Advertisement

23. To print out the results, just press

Interpretation of Results:

The battery is in good condition.
The battery is OK but need to recharge first in order to have the maximum
performance.
The battery is weak, need to be replaced with a good one.
The battery need to recharge first and then test again to confirm the final
results.
2. Volts : 12.55V (State of Charge [SOC])
The volts here indicated the State of Charge (SOC) of the tested battery which is 12.55V during open circuit
condition. [By referring to the table below, this battery is above 50% SOC]
-
State Of
Charge(SOC)
100 %
90 %
80 %
75 %
50 %
25%
0%
3. Battery Rating: 180 CCA
Fig.36
key on the Analyzer, the printer will start printing.
WET/SLI
12.60 V
12.58 V
12.44 V
12.40 V
12.20 V
12.00 V
11.80 V
State of Charge (SOC)
Rated CCA
Measured CCA (Power Available)
Internal Resistance
Life [Health]
AGM
12.80 V
12.72 V
12.64 V
12.60 V
12.30 V
12.00 V
11.80 V
GEL
12.85 V
12.77 V
12.69 V
12.65 V
12.35 V
12.00 V
11.80 V

Advertisement

Table of Contents
loading

Table of Contents