Table of Contents
Advertisement
1. Press and hold
below and that completes the process.
Warning: Performing the above procedures will erase off all the records from the tester.
Disclaimer
All information, illustrations, and specifications contained in this user manual are based on the latest information
available at the time of printing. The right is reserved to make any changes at any time without obligation to notify any
person or organization of such revisions or changes.
Furthermore, the manufacturer or its sales agents are not liable for errors contained herein or for incidental or
consequential damages (including lost profits) in connection with the furnishing, performance or use of this material.
This user manual tells how to use and perform the required procedures during testing. Safe and effective use of this
tester is very much dependent on the user following the normal practices and procedures outline in this manual.
Warranty Information:
Limited Warranty
This limited warranty cover defects in materials and workmanship for a period of twelve (12) months which begins
from the date the product is purchased by the end user and is subjected to the following terms and conditions:
1.
Within the warranty period, the manufacturer will repair or replace, at their options, any defective parts
and return to the owner in good working condition.
2.
Any repaired or replaced parts will be warranted for the balance of the original warranty or three months
(3) months from the date of repair, whichever is longer.
3.
This warranty only extends to the first owner and not assignable or transferable to any subsequent owner.
4.
Cost of delivery charges incurred for the repair of the product to and from the manufacturer will be borne
by the owner.
5.
This limited warranty covers only those defects that arises as a result of normal use and does not cover
those that arises as a result of:
Unauthorized modifications and repair.
•
Improper operation or misuse.
•
Accident or neglect such as dropping the unit onto hard surfaces.
•
Contact with water, rain or extreme humidity.
•
Contact with extreme heat.
•
Cables that have broken, bent contact pins or subject to extreme stress or wear.
•
and
keys together, a few seconds later the display will change to (Fig. 96) as shown
Fig.96
Advertisement
Table of Contents
