Interpretation Of Results - Matco Tools MBT2415 Instruction Manual

22. In less than 8 seconds, the results of the testing will be displayed on the LCD screen (Fig.36):
Battery Result
23. To print out the results, just press

Interpretation of Results:

The battery is in good condition.
The battery is OK but needs to be recharged first in order to have the maximum performance.
Flashing
The battery is weak, needs to be replaced with a good one.
Flashing
The battery needs to be recharged first and then tested again to confirm the final results.
2. Volts: 12.55V (State of Charge [SOC])
The volts here indicated the State of Charge (SOC) of the tested battery which is 12.55V during open circuit
condition. [By referring to the table below, this battery is above 50% SOC].
State
Charge(SOC)
100%
90%
80%
75%
50%
25%
0%
3. Battery Rating: 180 CCA
The battery capacity rated output is normally stated on the label for car batteries (either in CCA, EN, DIN, JIS,
etc.). For batteries with model numbers, please refer the charts provided with the Analyzer.
Fig.36
8
key on the Analyzer, the printer will start printing.
Flashing
Of WET/SLI
12.60 V
12.58 V
12.44 V
12.40 V
12.20 V
12.00 V
11.80 V
12.55 V
State of Charge (SOC)
[180 CCA]
Rated CCA
120 CCA
Measured CCA (Power Available)
18.91 m
Internal Resistance
70 %
Life [Health]
AGM
12.80 V
12.72 V
12.64 V
12.60 V
12.30 V
12.00 V
11.80 V
GEL
12.85 V
12.77 V
12.69 V
12.65 V
12.35 V
12.00 V
11.80 V
1812411-11
14