Table of Contents
Advertisement
Analyses the condition of the electrical return circuit contacts resistance which were connected to the
engine or chassis body from the battery terminal with results and recommendations display after test.
3. Starter Test:
This Test can be performed on 12V and 24V Starters.
Checks the cranking effectiveness of the battery to predict when the battery will fail to crank a vehicle
basing on voltage profiles with results and recommendations display.
4. Alternator Tests (with diode ripple test):
This test can be done on 12V and 24V Alternators (Normal or Smart).
These tests check the alternator charging conditions during load at 1,500 ~ 2,000 RPM, without load at
2,500 ~ 3,000 RPM and the diodes ripple volts with results and recommendations display after each test.
This test will determine whether the alternator is performing its job properly.
Specifications:
Operating Voltage:
Test Functions
12 Volts:
24 Volts:
Analyzing Capacity (Amps):
Automotive 12V Batteries:
Motorcycle 12V Batteries:
DC Volts Accuracy:
Battery analyzing time:
Maximum key-in:
Safety:
Internal Memory storage:
PC communication:
Printer:
Printer head:
Paper width:
Paper roll diameter:
Printing Speed:
Working Temperature:
Working Humidity:
Approvals:
9V ~ 36V DC (max)
Battery test, Starter test, Alternator + Diode ripple & Grounding tests
Starter test, Alternator test (Smart and Normal alternator)
CCA/SAE:
100A ~ 2000A
CA/MCA:
100A ~ 2000A
IEC:
100A ~ 2000A
JIS#:
100A ~ 2000A
CCA/SAE:
40A ~ 600A
CA/MCA:
40A ~ 600A
IEC:
40A ~ 600A
JIS#:
40A ~ 600A
± 1% Reading
Less than 8 seconds.
17 characters
Reverse polarity protected. Analyzer will not power ON.
Store up to 70 Test Results.
Through USB port.
Built-in
Thermo unit.
57.5mm ±0.5mm
Max. 45mmO.D
50mm/sec
0ºC (32°F) ~ 50ºC (122°F)
10% ~ 80 %
CE, ROHS
EN1:
100A ~ 2000A
EN2:
100A ~ 2000A
DIN:
100A ~ 2000A
EN1:
40A ~ 600A
EN2:
40A ~ 600A
DIN:
40A ~ 600A
Advertisement
Table of Contents
