Table of Contents
Advertisement
Changes
⚫
Item
Embedded media clamp
New sheet set up sequence
Added heater On/Off setting
Color of print light optimized
Temperature display during
heating up
Display preset name in the
preset menu
Base point setting with the
Other
front cover open
Reduced number of times for
[Enter] key operation at the
time of cover open error
PDF, HTML Manual WEB
Frequency of manual cleaning
reduced
Date and time in test print
pattern
Separate test for printing and
cutting with crop marks
Auxiliary jig for lifting the
machine
Contents
Sheet cut is possible without removing the
media clamp.
The machine reads the media width after
the lever is moved down and [ENTER] key
is pressed.
Print heater and dryer can be turned off at
once at the time of cutting only etc.
By optimizing light diffusion sheet or light
amount, print out can be seen more easily.
Current temperature is displayed in the
operation panel while the temperature is
rising.
Selected preset name is displayed, when
you enter Preset menu.
Base point can be set with the front cover
open.
Without pressing the [ENTER] key,
operation is resumed automatically when
the cover is closed.
Latest information is available in the
manual on the Web.
Frequency of manual cleaning is reduced.
Date and time are printed in test print
pattern.
Users can print crop marks only, and
perform cutting test and correction of
misalignment in laminated media.
Lift bar is used to lift the machine easier at
the time of installation.
1.Product Information
Rev.1.1
SG series
SG2
ー
ー
ー
ー
ー
ー
ー
ー
once every two
once a week
weeks
ー
ー
ー
CONFIDENTIAL
VG2 series
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
once every two
weeks
✔
✔
✔
✔
✔
✔
11/27
Advertisement
Table of Contents
