Specifications; Warning And Cautions - Yeelight CUBE Smart Lamp User Manual

Specifications

Model
Rated Input
Rated Input (with adapter)
Supported Platforms
The maximum expandable quantity:
Package Contents
Frequency Bands
Maximum Output Power
Wireless Connection
Replaceable control gear by an end-user.
Warning & Cautions
Please read the safety instructions carefully and keep it in a safe place.
1. Check the voltage before using the product. Improper voltage may damage the
product and cause potential safety hazards.
2. For indoor use only.
3. To prevent early equipment failure, the product should only be installed in operating
environment ranging between: 14°F to 77°F (-10°C to +25°C).
4. The equipment is not waterproof.
5. Regularly check the cable, the power supply and all other parts. Do not use this
luminaire when any part is damaged.
6. The external flexible cable or cord of this luminaire cannot be replaced. Do not use
the luminaire when the cable or cord is damaged.
7. The light source of this luminaire is not replaceable: when the light source reaches its
end of life the whole luminaire shall be replaced.
8. Do not disassemble the equipment privately.
9. Keep the equipment away from kids under 3-year-old.
10. The maximum recommended number of connections is 4pcs.
11. Please be careful to avoid being scratched by the sharp corners of the product.
12. Do not use the equipment when covered or recessed into a surface.
13. Under normal use of condition, this equipment should be kept a separation distance
of at lest 20cm between the antenna and the body of the user.
YLFWD-0008/YLFWD-0009/YLFWD-0010
12V 0.21A, 2.5W (1pcs) 12V
10W (4pcs)
100-240V ~ 50/60Hz, 0.14A
Android 4.4 & iOS 10.0 or above
4pcs
Smart lamp x 1, adapter, controller, user
manual
2412MHz-2472 MHz (Wi-Fi), 2402-2480
MHz (BT)
19.99 dBm (Wi-Fi) 7.82dBm (BT)
Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth
5.0 BLE
8
0.8A,