Tonearm Section - Denon DP-47F Operating Instructions Manual

MOTOR
Drive System:
Turntable Speeds:
Wow & Flutter:
S/N Ratio:
Rise Time:
Turntable Platter:
Motor:
Speed Control System:
Speed deviation:
Load characteristics:
GENERAL
Power Supply:
Power Consumption:
Dimensions:
Weight:
TONEARM SECTION
Arm Type:
Effective Length:
Overhang:
Tracking Error:
Automatic Mechanism:
Adjustable Tracking Force Range:
Suitable Cartridge Weight Range:
CARTRIDGE
Output Voltage
Frequency Response:
Tracking Force:
Servo controlled direct drive
33-1/3, 45 rpm
Below 0.010% wrms (servo system)
Below 0.020% (JIS)
Over 78 dB (DIN-B)
Nominal speed within 2 seconds (at 33-1/3 rpm)
Aluminum die-cast; 310 mm diameter
Linear drive motor
Speed servo by frequency detection, phase servo control
Below 0.01%
0% (80 g tracking force; outermost groove)
50/60 Hz, Voltage is shown on rating label
Approx. 8 W
434 x 179 x 410 mm (W x H x D)
17 x 7.3 x 16.1 in
Approximately 8.5 kg (19 Ib)
Dynamically balanced, straight tube tonearm
220 mm
16 mm
Within 3°
Electronically controlled, fully automatic
0 ~ 3.0 g (1 scale = 0.1 g)
Approximately 3.0 ~ 12.0 g (including screws, nuts)
DL-80MC DL-160 (European model only)
1.6mV 1.6 mV
20 Hz ~ 45 kHz 20 Hz ~ 45 kHz
1.8+0.3 g. 1.8+0.3 g.
High-output MC type High-output MC type
U.S., Canadian and Asian models do not include cartridge.
* For product improvement purposes, the specifications are subject to change without notice.
_9—