Advertisement
Indication
Meaning
_#_
RECORDING
FAILURE
• Performance
of recording medium is poor. Use the
40
Cleanup function [CLEAN UP] in the menu.
• The writing speed of recording medium is slow, or the
3
recording
medium is corrupted.
Use an SD card that is
guaranteed
to operate.
15
• The recording medium was subjected to vibrations
or jolts.
_
Be careful not to subject the recording medium to
vibrations
or jolts.
• Appears when the built-in hard disk is full and recording is
not possible.
Delete unnecessary
files.
36
• Appears when the SD card is full and recording
is not
possible.
Replace with new recording medium or delete
36
unnecessary
files.
RECORDING
MAY NOT BE
• The data may not be recorded
on the recording medium
-
CORRECT
ON THE MEMORY
correctly, Try recording again,
CARD
• Otherwise,
clean up the recording medium.
40
MEMORY
CARD
CANNOT
BE
• The recording medium cannot be played back correctly. Try
-
PLAYED
BACK
CORRECTLY
playback again,
CANNOT
USE IN VIDEO
MODE
• The operation is not available in the video mode.
DROP DETECTION
WORKED
• The drop detection function operated, and the power was
29
AND
THE POWER
IS TURNED
turned off. The file that was being recorded may have been
53
OFF
saved into the [EXTMOV]
folder.
Before
cleaning,
turn off the camera
and remove the battery
pack and AC adapter.
To clean the exterior
Wipe
gently with a soft cloth. If the camera
is particularly
dirty, dip the cloth into diluted
mild soap
and wring it out well before wiping.
Then wipe again with a dry cloth.
To clean the LCD monitor
Wipe
gently with a soft cloth. Be careful not to damage
the monitor.
To clean the lens
Wipe
gently with lens cleaning
paper.
NOTES:
• Avoid using strong cleaning agents such as benzine or alcohol.
• Cleaning
should be done only after the battery pack has been removed or other power units have been
disconnected.
• Mold may form if the lens is left dirty.
• When using a cleaner or chemically treated cloth, refer to the cautions for each product.
Advertisement
