Advertisement
Preparation:
• Set the power switch to [_.
• Select the file type (video or still image) using
the MODE switch.
MENU
2 Select [PROTECT].
4
Select
[EXECUTE].
If [FILE SELECT]
was selected
in step 3,
select
[QUIT].
To release
protection
Select the protected file in step 3.
To release
protection
of all files
1) In step 3, select
[CANCEL
ALL], then press
I_11.
2) Press
^Iv
to select
[EXECUTE],
then
press I_11.
3
Select the desired menu.
• [CURRENT]:
Currently displayed file is protected.You
can
select the previous or next file by pressing
</>
• [FILE SELECT]:
You can choose multiple files to protect from
index screen,
1) Press A / v / < / } to select the file you
want to protect, then press I_11.
• The O-n mark appears on the file. To
select other files, repeat this step.
• If you slide the zoom lever towards T, the
preview screen is displayed. Sliding the
zoom lever towards W returns to the
index
screen.
2) Press MENU.
• [PROTECT
ALL]:
All files are protected.
NOTE:
For an SD card, you can use the write/erase
protection tab to set protection,
To protect all the
files, slide the tab to the "LOCK" position,
Write/erase
protection
tab
Advertisement
