Getting The Most Out Of Dolby Pro Logic Surround Sound - Sony TA-AV661 Operating Instructions Manual

ae ee eee
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode. Then, adjust the
volume of each speaker.
Note that you must connect the rear speakers and/or a
center speaker to do the following adjustments.
CENTER
MODE DOLBY ~<~/ » CENTER REAR
SURROUND CENTER
MODE LEVEL +/-
SURROUND
REAR LEVEL
ON/OFF
+/-
DELAY
T.TONE
BALANCE
UR
_ Using Sound Fields
Selecting the center mode
The amplifier offers vou four center modes:
NORMAL, WIDE, 3 CH, and PHANTOM. Each mode
is designed for a different speaker configuration.
Select the mode that best suits vour speaker's system
configuration.
1. Press DOLBY to select the DOLBY PRO LOGIC
sound field.
2 Press CENTER MODE repeatedly until the center
mode you want appears in the display. Select the
center mode by referring to the following chart.
If you have Select So that
The bass sound of the
speakers, and a center channel is
small center output from the front
speaker speakers (because a
small speaker cannot
produce enough
bass).
ee ee
Front and rear WIDE For "complete"
speakers, and a Dolby Pro Logic
large center Surround sound.
speaker
Front and rear NORMAL
The sound of the rear
channel is output
Front and center = 3CH
speakers, no rear (3 Channel
speaker Logic) from the front
speakers.
Fronttand rear PHANTOM The sound of the
center channel is
output from the front
speakers.
speakers, no
center speaker
o When you use the remote
Press SURROUND MODE repeatedly to select the
DOLBY mode.
You can adjust the speaker's volume or delay time
simply by pressing the buttons on the remote.
(continued)
13