Record Power SC1 Original Instruction Manual page 35

13. 62301 Dome Jaws
These jaws are able to hold the smallest work pieces. The
convex internal radius on each jaw is designed to avoid
damage to small and fragile work. It allows the user to
get very close to support thin work as safely as possible.
It also allows good access to work close to the base of
a work piece without the tool fouling on the jaws. For
maximum support always ensure the workpiece features
a spigot long enough to be supported along the full
length of the jaws' internal surface.
SC1 (60005)
Contraction (spigot):
Contraction (square):
32 mm
33 mm
4 - 11.5 mm ( ⁄ - ⁄ ")
3 7
16 16
4 - 11.5 mm ( ⁄ - ⁄ ")
3 7
16 16
33 mm
SC2 (60001)
Contraction (spigot):
Contraction (square):
4 - 25.5 mm ( ⁄ - 1")
3
16
4 - 25.5 mm ( ⁄ - 1")
3
16
35