Record Power SC1 Original Instruction Manual page 26

9. Maintenance
Cleaning the SC1
Remove the blind set screw and protective leather disc
which secure the insert to the chuck body.
Remove the chuck insert from the chuck body as shown
in Fig 9.7.
Kg
Warning: Wear eye protection when removing
the circlip as it may fly from the pliers.
Kg
Remove the circlip which holds the gears in the chuck
body using a pair of circlip pliers Fig 9.8.
Carefully turn the chuck body to face upwards. This will
allow the scroll gear to drop from the chuck body. Ensure
it is caught to prevent any damage, Fig 9.9.
Remove all 4 jaw slides as shown in Fig 9.10 by
carefully pulling them away from the chuck body.
Once the chuck is fully disassembled, remove all grease,
dust and debris from the components.
Once clean, apply a generous amount of fresh standard
multi-purpose grease to the scroll gear before re-
assembling the chuck.
26
i
i
i
Fig 9.7
Fig 9.8
Fig 9.9
Fig 9.10