Network Select (Menu 4-7); Factory Set (Menu 4-8) - UTStarcom GPRS779 User Manual

Setting
Network Select
The Network Selection feature enables you to
4. Setting
automatically or manually select the network used
2 Alarm Set
3 Call Setting when roaming outside of your home area.
4 Phone Settin..
� � � Note : You can select a network other than
5 Security Sett..
6 GPRS Setting your home network only if it has a valid roaming
7 Network Sele..
agreement with your home network.
To automatically or manually select the network when
roaming:
1
Press the or key until the appropriate option
highlights and then press the
●If you select Automatic, you are connected to the first available
network on the preferred list when roaming.
●If you select Manual, the phone scans for the available networks.
Go to Step 2.
2
Press the or key until the preferred network highlights and
then press the soft key.
●You are connected to that network.
103
Menu 4-7
soft key.
Factory Set
This menu allows you to reset the phone. Resetting
4. Setting
the phone restores the default value of all of the
3 Call Setting
menu settings.
4 Phone Settin..
5 Security Sett..
When you select the factory set, the message
6 GPRS Setting
"Are You Sure?" will be displayed.
7 Network Sele..
8 Factory Set
Select soft key and your phone will ask you to
enter the password. Enter the 4-digit password and
press the soft key. The default value is set.
The default phone password is "0000".
For further details about the password, see page 97.
104
Menu 4-8